高感应电流小感应电流做实验的时候仪（耐弧光做实验的时候仪）-（求算机管理）

High voltage low current tester (arc resistance tester) - (computer control)

企业产商品英文名称称：耐电弧试验机

Product name: electric arc resistance tester

软件具体型号：NDH-A

Product model: NDH - A

无法条件：GB/T 1411-2002《粉状隔热相关材料耐高偏低感应电流脉冲电流的检测》（等一起IEC  61621-1997）及ASTM D495等标准单位的规定要求来设计生产制造的，并满足IEC 149、UL 746A等疲劳试验的方式

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

最主要适用人群领域及功能性：

本试验检测机是通过软件于变频电动机、电热器和家居电热器等企业的电焊工用可金属、聚酯树脂素材胶和接地带漆等接地带素材的耐脉冲放电稳定性评审，主于气体接地带素材如：可金属、透气膜、聚酯树脂素材、矿石、陶瓷图片、波璃、接地带油、接地带漆、瓦楞纸板等媒介的耐脉冲放电稳定性测试仪；

本试验检测机由算出机把控好工作，行彰显如今进行实验报告性所的情形及进行实验报告性所日期，进行实验报告性所结速后并上传如今进行实验报告性所数值，并可打印出.标准的研究检测结果。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为两排立体式框架，下边为实操体系，顶部为实验箱。

2 本企业产品分为*新智慧操纵技巧，采用首选系统程序（IEC或ASTM）可自动化做好冲击试验，并在PC平板电脑上呈现耐压时候和导致。

3 **效果积极，抗干拢实力强，考试可靠性强，精密更高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电孤通断日子数据误差：不大于 ±10ms

2 调压器数量：2kVA

3 电机额定功率实验设计电流电压：12.5kV

4 可靠性试验的电压可靠性强，精密度：±3%

5 电流大小调控高精准度：±10%  电流量测量方法准确度：1.5%

6 电级对样品各种压力：（0.5±0.05）N

7 金属电极村料：钨棒

8 参比电极范围：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 操作室内环境摄氏度：（23±2）℃

10 动用大环境水分子含量：（50±5）%

11 交流电源：220V±5%  50Hz  10A

12 耐压试验    办法：   标准/美标/10 mA 连继/20 mA 间断性/30 mA间断/40 mA间隔

13 试验报告步骤正确：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 的产品材质：

NDH-A    耐电弧焊接做实验的时候仪-微机调控

NDH-B    耐弧光经过多次实验发现仪-触屏屏的控制

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！